Skip to Main Content
Rochelle Park - 199 NJ-17
199 NJ-17, Rochelle Park, NJ 07662
Mon 10:00AM - 7:00PM
Tue 10:00AM - 7:00PM
Wed 10:00AM - 7:00PM
Thu 10:00AM - 7:00PM
Fri 10:00AM - 7:00PM
Sat 9:30AM - 2:00PM
Sun Closed
Bergenfield - 20 N Washington Ave
20 N Washington Ave, Bergenfield, NJ 07621-2157
Mon 9:00AM - 4:00PM
Tue 9:00AM - 4:00PM
Wed 9:00AM - 4:00PM
Thu 9:00AM - 5:00PM
Fri 9:00AM - 4:00PM
Sat 9:00AM - 3:00PM
Sun Closed
Epic Engineered Hardwood

Epic Engineered Hardwood

Engineered hardwood is the fastest-growing segment of the hardwood market. Our company is proud to offer one of the premier engineered hardwood collections available—Epic from Shaw Floors.

What’s so great about Epic? It’s a premium product that provides advanced visual, technological, installation, and long-term performance solutions over conventional solid and engineered hardwood flooring products. It comes in a vast array of sizes, species, surface textures, and price points. Epic can go where other hardwoods can’t—over concrete, in basements—which isn’t possible with ¾” solid products. Any installation method can be used, and no acclimation is needed.

Compared to others …

Epic is harder, denser, and greener than comparable floors.

Harder

Because of the hardness of Epic’s center core, EnviroCore(R), Epic performs substantially better than ¾” solid and comparable ½”-thick engineered products with softer cores

Janka Scores:

  • Oak—133% of hardness of solid oak, 125% of hardness of ½”engineered oak
  • Hickory—120% of the hardness of solid hickory, 136% of the hardness of ½” engineered hickory
  • Maple—141% of hardness of solid maple, 139% of hardness of ½” engineered maple
  • Cherry—190% of hardness of solid cherry, 195% of hardness of ½” engineered cherry
  • Walnut—202% of hardness of solid walnut, 159% of hardness of ½” engineered walnut

Denser

Epic’s 3/8” EnviroCore is denser than ¾” solid oak and all engineered products with softer plywood cores. The result is better overall performance and stability but in a more environmentally responsible thickness. More “solid” wood fiber per cubic inch than thicker ½” engineered and even ¾” solid oak!

Comparisons to Epic

  • ½” Brazilian Cherry = 28% less dense
  • ½” Oak = 29% less dense
  • Solid Oak = 40% less dense
  • 9/16” Maple = 44% less dense

Greener

  • Epic’s EnviroCore is now Third Party Certified to comply with the US Environmental Protection Agency’s guidelines for Environmentally Preferable Products.
  • EPP Certification requires that products must be made from 100% recycled and/or recovered fiber and meet the CARB requirements for formaldehyde emissions.
  • This is the first EPP certification program accredited by the American National Standards Institute (ANSI), and it is also accredited by the Standards Council of Canada (SCC).
  • The verification for additional LEED credits is underway.

Some other Epic facts:

  • Comes in premium oak, maple, hickory, cherry, and walnut species
  • Available in two widths and three ultra-premium finishes that provide maximum wear resistance for lasting beauty
  • Lifetime Wear Warranty
  • Qualifies for LEED for home
  • Made in the USA
  • Featured in the HGTV Green Home for 2008 and 2009

2 trees minus 1 tree equals Epic:

Epic uses fewer resources, thanks to EnviroCore, which is made from every part of the tree that would otherwise have been burned or sent to the landfill. 3/8” Epic uses 50% fewer trees—that is, for every two trees used to make 3/8”-thick conventionally engineered hardwood flooring, it only takes one tree to make the same amount of Epic 3/8”-thick hardwood flooring.

Check out the many benefits of EnviroCore—Shaw’s dense inner core made of recycled wood by-products:

  1. Greatly improved moisture tolerance over traditional solid or engineered wood flooring which enables—the ability to install on, above or even below grade, which isn’t possible with ¾” solid products; the ability to install using a nail / staple, glue-down or floating installation method; zero acclimation in climate-controlled environments
  2. Ultra-straight boards and precision milling—enabling faster installation without having to pry bowed or warped boards into place; providing an advanced patent-pending tongue-and-groove system for easier glue-down installs with much less gapping and, ultimately, less mess
  3. Optimum product stability, greatly reducing seasonal expansion that often results in gapping